The industry standard for professional contractors who spray a variety of residential coatings, commercial and industrial jobs.
With a 2.0 hp brushless DC motor, the Ultra Max II 695 is a rock-solid performer for the professional residential contractor who sprays a wide variety of coatings. It can handle a wide variety of tip sizes and has outstanding proven reliability. Now with higher performance allowing you to get your job done faster !
○ Advantage Drive System Runs quiet and has a lifetime guarantee. ○ MaxPower Brushless DC Motor – Never change brushes with this maintenance-free, totally enclosed motor. ○ SmartControl 3.0 Pressure Control – Delivers consistent spray fan without pressure fluctuations at all spraying pressures, and includes ProGuard technology. ○ Endurance Pump – Amazingly durable and easy-to-service design means less downtime on the job. ○ Easy Out Pump Filter – Spill less material when removing the filter element. ○ Rugged Cart Design – Chrome over steel makes this durable cart last for years. ○ Heavy-Duty Prime Valve – Maintenance-free design withstands high pressure dumping.
The ProContractor Series sprayer has all the features of the Standard Series, plus: ○ QuikReel – Deploy and rewind up to 300 ft of hose in seconds without twists or coils. ○ LED Display – Bright easy-to-read LED display shows pressure readout, job/lifetime/gallon counter and self diagnostics. ○ WatchDog Pump Protection System – Saves the pump from damage when paint or texture material runs out or a hose breaks. ○ ProConnect 2 Pump Removal System – Change out the pump using no tools in seconds resulting in quickly getting back to work. ○ FastFlush Cleaning System – Cleans the unit four times faster using only half the water. ○ On-Board Toolbox – End frustration and save time by never again searching for tips, filters, and tools. ○ Ready to Spray – Save setup time, thanks to the 100 ft of hose and gun that’s already attached and ready to use.
ProContractor series unit includes:
RAC X 517 SwitchTip and Guard
2 each - 1/4 in x 50 ft (6.4 mm x 15 m) BlueMax II Airless Hose
Sprayer Maximum Delivery International Models: 2.8 lpm Maximum Tip Size: 0.031" - 1 Gun ; 0.019" - 2 Guns Max PSI (Bar): 3300 (227) Fluid Outlet npsm: 1/4 in Cycles: 60 per liter Generator Minimum: 5000 W 230V, A, Hz: 9, 50/60
Dimensions Weight: 50 kg Height: 99 cm Length: 75 cm Width: 57.2 cm Wetted parts: zinc- and nickel-plated carbon steel, nylon, stainless steel, PTFE, Acetal, leather, UHMWPE, aluminum, tungsten carbide, PEEK, brass
Noise Level: Sound Power, dBa per ISO 3744; measured at 3.1 ft (1 m): 91 dBa Sound Pressure, dBa per ISO 3744; measured at 3.1 ft (1 m): 82 dBa
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within one (1) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.