- Home /
- Graco 24G582 LD Series 3:1 Oil Pump
LD Series 3:1 Oil Pumps
Air Operated Piston Pump
Stay ahead of the competition with LD Series Pumps. These affordable and full featured pumps are designed for lower volume applications and are available in 3:1 and 5:1 for oil and 50:1 for grease. These pumps are fine-tuned for a compact, flexible and still incredibly durable solution.
You work hard to provide good service and that’s exactly what we had in mind when we engineered the LD Series Packages. Whether your delivery is in your backyard or 50 miles away, LD Packages reliably do the job. You can count on Graco equipment to reduce repair hours so you can concentrate on deliveries and bring more to your bottom line.
Features and Benefits
○ Medium pressure, high flow applications
○ Built-In Thermal Relief protects your equipment from thermal expansion without the need to buy and install an additional kit
○ Inlet Strainer (oil only) is built-in to protect pump from containments that can damage your pump
○ Three Inch Air Motor – Provides more power to create better flow
○ NXT Air Valve – Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.
○ Modular Air Valve – Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.
○ Cup and plate design eliminates the need for O-rings that wear out faster
○ Lubricant transfer
○ Automotive dealerships
○ Fast lube centers
○ Service shops
○ Lube trucks
Typical Fluids Handled
○ Petroleum and synthetic-based oils
Product Ordering No: 24G582
- Graco LD 3:1 Oil Pump with 55 gal (200 liter) down tube
- Bung Adaptor (24F918)
Maximum Fluid Working Pressure: 450 psi (31 bar, 3.10 MPa)
Fluid Pressure Ratio: 3:1
Suction Lift (feet of oil): 10
Air Operation Range : 20 to 150 psi (1.37 to 10.3 bar, 0.137 to 1.03 MPa)
Recommended Air Pressure for Optimum Pump Life: <125 psi (8.6 bar, 0.86 MPa)
Maximum Recommended Pump Speed: 120 cycles/min
Cycles Per Gallon/pound (l/kg): 29 cycles per gallon (7 cycles per liter)
Recommended Speed for Optimum Pump Life: 75 cycles/min and lower
Wetted parts: zinc plated carbon, steel, aluminum, nitrile, polyurethane, nickel plated aluminum
Sound Pressure Level: 72.9 dB(a)
Sound Power Level: 82.0 dB(a)
Approx. Weight: 3.2 kg
Air Inlet: 1/4 in
Fluid Inlet: 1 in
Fluid Outlet: 1/2 in
Free Flow: 7.8 gpm
Annual Usage: Up to 20,000 gal (76,000 l)
Materials: Motor Oil, Gear Oil, Hydraulic Fluid, Automatic Transmission Fluid, Oil, Grease
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within one (1) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.
Be the first to review this product
CT Hardware Sdn Bhd (70683-X) - Online Division
Address: No.26, Jalan Pendaftar U1/54, Seksyen U1, Taman Perindustrian Temasya, Glenmarie 40150 Shah Alam, Selangor, Malaysia
Phone: (603) 5569 9902
Fax: (603) 5569 9985